Denon DNHD2500 Operating Instructions - Page 9

ENGLISH 3 PART NAMES AND FUNCTIONS (1) Side panel (2) Front panel !5 JOG disc • Use this vinyl JOG for file search, scan, manual search, Pitch Bend and Scratch operations. q USB A terminal • Connect a mass storage device, USB keyboard or USB hub. w USB B terminal • Connect a computer. • MP3/WAV files and playlist files are transferred between the computer and the DN-HD2500. e Digital output terminals • Digital data is available from this terminals. • Use 75 Ω/ohms pin cord for connection. • We recommend you use braided wire type shielded cable. NOTE: • The playback level after analog conversion is set to -6 dB below the usual level to avoid digital distortion. r Analog output terminals (LINE OUT) • This is unbalanced RCA output terminals. • Audio signals outputs. t Fader start terminals • Use this when your mixer has the Fader Start function. y POWER button (¢ON £OFF) • Push this button to turn power on and off. u DRIVE terminal • Connect the DN-D4000/4500/BU4500 drive unit. For instructions on operating the DND4000/4500/BU4500, refer to the respective model's operating instructions. CAUTION: • Note that there are many buttons working two different function selected by short time pushing or long pushing (1second or more). The " " mark indicates short time push function and " " mark indicates long time push function. i CUE/STUTTER button • Pushing this button in play mode will force the file back to the position which playback started. While in search mode, it makes new Cue point. (Cue) • In Cue mode, by pushing the CUE button makes a Stutter sound from the Cue point. This is called Stutter play. (Stutter) !6 REVERSE button • Push this button to set the REVERSE. !7 PITCH/KEY, RANGE button • PITCH/KEY: With this button you can select PITCH and KEY ADJUST mode. Mode changes Pitch on, Key Adjust on and both off cyclically. PITCH indicates in Pitch mode and KEY ADJUST indicator in the display lights up in Key Adjust mode. • RANGE: Push this button for more than 1 sec to select the pitch range. The pitch range can be selected with the PARAMETERS knob from ±4, 10, 16, 24, 50 or 100 %. o PLAY/PAUSE button (13) • This button will start or pause playback. • Push once to start playback, once again to pause playback, and once more to resume playback. !8 Pitch Slider • Use this slider to adjust playing speed. • The playing speed decreases when slid upwards and increases downwards. !0 NEXT FILE button If this button is pushed during playback, the NEXT !9 BACK button • Press this button to return to the previous screen. FILE mode will be selected. The next file can be A long-press shall return to the top menu. selected with the PARAMETERS knob. !1 JOG MODE button Select from Scratch playback, Bend mode, File search or Manual Frame Search mode. • SCRATCH: This button lights up or blinks in orange when scratching. Manipulate the sound by pushing down on the JOG disc. • BEND/SEARCH: When the JOG mode is set to BEND during @0 PARAMETERS knob • PARAMETERS: When the PARAMETER indicator is flashing, turn this knob to select and change the parameter for items found in the Platter effects, Memo, and Preset data, etc. • FILE SEARCH: When PARAMETER indicator is on, turn this knob to select files. playback, it alternates as the pitch bend function. The display will indicate "Bend". When JOG mode is set to Search, during Pause or CUE mode, it @1 SOURCE button • Press this button to select the source (HDD, CD, USB1 to 4 or PC). alternates as the Manual Search function. Manual search allows you to move the CUE point around @2 CONT./SINGLE, RELAY button by one frame at a time (1/75 second) with an • CONT./SINGLE: audible frame-repeat sound. The display will A short tap of this button will toggle between 3 indicate "Search". possible END modes for playback CONT. !2 BRAKE button (continue: plays all files) SINGLE (stops playing and ReCUE's back to your original set point), • Push this button to set the BRAKE and adjust the PLAYLOCK-see below. parameter. • SINGLE PLAY LOCK: !3 JOG indicator • This vibrant blue bar provides JOG modes at a SINGLE PLAY LOCK can be selected by PRESET. When SINGLE PLAY LOCK is selected, file selection during playback is disabled. This glance such as, Scratch Memory, Pitch Bend and prevents playback from stopping when the Frame Search. PARAMETERS knob is turned accidentally during !4 DUMP button • Push this button to set the DUMP. playback. Play ending mode is the same as single. 4 • RELAY: You can turn on and off RELAY PLAY mode. ENGLISH @3 TITLE/ID3, C-FADE button • TITLE/ID3: When an MP3/WAV file has ID3 Tag data, the artist name, album name, genre, BPM, and year are displayed. • C-FADE: Switches cross-fading on and off. @4 MEMO, PRESET button • MEMO: The MEMO mode starts when this button is pushed once in the Cue mode. • PRESET: When this button is pushed for more than 1 sec, the PRESET mode menu is displayed. The machine status must be in CUE, PAUSE or No JOG mode before entering the preset mode. @5 TIME, UTIL. button • TIME: When this button is pressed, the time indicator switches between "ELAPSED" (elapsed time), "REMAIN" (remaining time), "T.ELAPSED" (total elapsed time) and "T.REMAIN" (total remaining time). (The "T.ELAPSED" and "T.REMAIN" indicators only light when in the playlist play mode.) • UTIL.: The Utility mode is set when this button is longpressed while both decks are in the cue. @6 PITCH BEND ± buttons • Pushing these buttons will change main playing speed temporarily. • While pushing PITCH BEND + button the playing speed increases and speed decreases while pushing PITCH BEND - button. • When release button, playing speed returns to the previous speed. @7 PLAY LIST button Switches the playback mode. • File Play: Selects and plays an MP3/WAV file. • Playlist Play: Selects a playlist file and plays the MP3/WAV files registered on that playlist (up to 99 songs can be registered).