Denon S52WT Owners Manual - Page 12

Getting Started Connections Setup Playback Information Troubleshooting ENGLISH AM loop antenna assembly Remove the vinyl tie and take out the connection XM Connector USB Port line. • The S-52 is an XM Ready® receiver. You can receive XM® Satellite n Front panel Radio by connecting to the XM Mini-Tuner and Home Dock (includes Connect to the AM antenna terminals. home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel. Bend in the reverse direction. • Position the Home Dock antenna near a south-facing window to receive the best signal. For details, see "Listening to XM Satellite Radio Programs" (vpage USB 22). a. With the antenna on top any stable surface. When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home Dock. Mount b. With the antenna attached to a wall. XM Mini-Tuner and Home Dock Installation hole Mount on wall, etc. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. NOTE • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. XM NOTE The main S-52's USB port cannot be connected to PCs using a USB cable. Connection to a Subwoofer Use connected to a subwoofer. Subwoofer 46#800'&3 */ NOTE Keep the power cord unplugged until the XM Mini-Tuner and Home Dock connection have been completed. • The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights reserved. • XM Ready is a registered trademark of XM Satellite Radio Inc. All rights reserved. NOTE When turning the power ON/OFF: ON: First turn on the power to the main unit, then turn on the power to the subwoofer. OFF: F irst turn off the power to the subwoofer, then turn off the power  to the main unit.