Denon S52WT Owners Manual - Page 36

Getting Started Connections Setup Playback Information Troubleshooting ENGLISH GNET/USBH Symptom When a USB memory device is connected, "USB" is not displayed on the menu. Files on a USB memory device cannot be played. The file names are not displayed properly ("...", etc.). Files stored on a computer cannot be played. Cause Countermeasure • The set cannot recognize a USB • Check the connection. memory device. • A USB memory device not • Connect a USB memory device conforming to mass storage conforming to mass storage class is connected. class. • A USB memory device that • This is not a malfunction. DENON the set cannot recognize is does not guarantee that all USB connected. memory devices will operate or receive power. • USB memory device is connected • Connect the USB memory device via USB hub. directly to the USB port. • USB memory device is in format • Set the format to FAT16 or other than FAT16 or FAT32. FAT32. For details, refer to the USB memory device's operating instructions. • USB memory device is divided • When divided into multiple into multiple partitions. partitions, only files stored in the top partition can be played. • Files are stored in a non- • Record the files in a compatible compatible format. format. • You are attempting to play a file • Files that are copyright protected that is copyright protected. cannot be played on this set. • Characters that cannot displayed are used. be • This is not a malfunction. On this set, characters that cannot be displayed are replaced with a " . (period)". • Files are stored in a non- • Record in a compatible format. compatible format. • You are attempting to play a file • Files that are copyright protected that is copyright protected. cannot be played on this set. • Set and computer are connected • The set's USB port cannot by USB cable. be used for connection to a computer. Page 8 - - - - - 25 25 - 25 25 - Symptom Cause Countermeasure Internet radio • Ethernet cable is not properly • Check the connection status. cannot be played. connected or network is disconnected. • Program is being broadcast in • Only Internet radio programs in non-compatible format. MP3 and WMA can be played on this set. • The computer's or router's • Check the computer's or router's firewall is activated. firewall settings. • Radio station is not currently • Choose a radio station that is broadcasting. currently broadcasting. • IP address is wrong. • Check the set's IP address. Server is not found, or it is not possible to connect to the server. • The computer's or router's • Check the computer's or router's firewall is activated. firewall settings. • Computer's power is not turned • Turn on the power. on. • Server is not running. • Launch the server. • Set's IP address is wrong. • Check the set's IP address. Cannot connect to • Radio station is not currently • Wait a while before trying again. preset or favorite broadcasting. radio stations. • Radio station is not currently in • It is not possible to connect to service. radio stations that are no longer in service. For some • Station is congested or not • Wait a while before trying again. radio stations, currently broadcasting. "Server Full" or "Connection Down" is displayed and station cannot be connected to. Sound is broken during playback. • Network's signal transfer speed • This is not a malfunction. When is slow or communications lines playing broadcast data with a or radio station is congested. high bit rate, the sound may be broken, depending on the communications conditions. Sound quality is • File being played has a low bit • This is not a malfunction. poor or played rate. sound is noisy. Page 9 - - 17 12, 13 - - - 12, 13 - - - - - 32