Denon S52WT Owners Manual - Page 13
Network Audio - network audio system
UPC - 883795000574
View all Denon S52WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Connections Setup Playback Information Troubleshooting ENGLISH Network Audio [Wired LAN] Internet radio Modem Computer Router To WAN side To LAN port To LAN port LAN port/ Ethernet port [Wireless LAN] Internet radio Modem To WAN side Computer Router with access point Wireless LAN rod antenna (Supplied) Turn clock wise Required System n Broadband Internet Connection A broadband line connection to the Internet is required in order to use the S-52's Internet radio function. n Modem This is a device that is connected to the broadband line to communicate with the Internet. n Router When using the S-52, we recommend you to use a router equipped with the following functions: • Built-in DHCP (Dynamic Host Configuration Protocol) server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. n Ethernet Cable (CAT-5 or greater recommended) The S-52 does not come with an Ethernet cable. Purchase a cable of the required length. n Computer A computer with the following specifications is required to operate the music server: • OS Windows® XP Service Pack2, Windows Vista • Software · .NET Framework 1.1, Windows Media Connect (Windows XP) · Windows Media Player Ver.11 · DLNA-compatible server software • Internet browser Microsoft Internet Explorer 5.01 or later • LAN port • 300 MB or more free disk space bFree space is required to save music files. The following sizes are approximate. Format MP3 / WMA MPEG-4 AAC WAV (LPCM) FLAC Bit rate 128 kbps 192 kbps 256 kbps 392 kbps 1400 kbps 1080 kbps Per minute Approx. 1 MB Approx. 1.5 MB Approx. 2 MB Approx. 3 MB Approx. 10 MB Approx. 7.7 MB Per hour Approx. 60 MB Approx. 90 MB Approx. 120 MB Approx. 180 MB Approx. 600 MB Approx. 464 MB (1 MB = 106 bytes) For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop. NOTE • A contract with an ISP is required to connect to the Internet. No additional contract is needed if you already have a broadband connection to the Internet. • Depending on the server, video files may be displayed, but they cannot be played on the S-52. • The types of routers that can be used depend on the ISP. Contact an ISP (Internet Service Provider) or a computer shop for details. n Others • If you have an ISP contract for a line on which network settings are made manually, make the settings at "Network Setting" (vpage 12, 13). • When using a broadband router (DHCP function), the S-52 makes the network settings automatically, so there is no need to make them yourself. • If connecting the S-52 to a network with no DHCP function, make the settings at "Network Setting" (vpage 12, 13). • The S-52 is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a line of the type with which the PPPoE is set. • Depending on the ISP with which you have your contract, it may be necessary to make proxy server settings to use the Internet radio function. If you made proxy server settings on the computer to connect to the Internet, make the same proxy server settings on the S-52. • The S-52 uses the DHCP and Auto IP functions to make the network settings automatically. n Ethernet Cable (CAT-5 or greater recommended) No Ethernet cable is included with the S-52. Procure a cable with the necessary length. NOTE Be sure to use a shielded type cable for USB/Ethernet connections. Depending on the connected computer/router, there may be much noise generated from the cable.