Denon S52WT Owners Manual - Page 32

Getting Started Connections Setup Playback Information Troubleshooting ENGLISH About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Convenient Functions Personal Memory Plus Function This function sets the settings last selected for the individual input sources. When you switch to an input source, the settings are automatically set to the ones that were set the last time that input source was used. Last Function Memory This stores the settings as they were directly before the standby mode was set. When the power is turned back on, the settings are restored to as they were directly before the standby mode was set. Backup Memory The various settings are backed up for about 1 week, even if the power is turned off or the power cord is disconnected. Resetting the Microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. 1 Remove the power plug. 2 While pressing and simultaneously, plug the power cord into a power outlet. 3 When "INITIALIZE" is displayed, release your fingers from the two buttons. When "INITIALIZE" is not displayed in step 3, repeat operations from step 1. Auto Power On When the power is in the standby mode, the power turns on simply by pressing or . 28