Dewalt D25911K Instruction Manual - Page 11

Accessories  WARNING: Since accessories, other than those offered by DeWALT, have not been tested with this product, use of such accessories with this product could be hazardous. To reduce the risk of injury, only DeWALT recommended accessories should be used with this product. Recommended accessories for use with your product are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DeWALT. Call 1‑800‑4‑DeWALT (1‑800‑433‑9258) or visit our website: www.dewalt.com. Repairs  WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by a factory service center or an authorized service center. Always use identical replacement parts. Register Online Thank you for your purchase. Register your product now for: • WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product. • CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase. • FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. • Register online at www.dewalt.com. English Three Year Limited Warranty For warranty terms, go to https://www.dewalt.com/ support/warranty. To request a written copy of the warranty terms, contact: Customer Service at DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286 or call 1‑800‑4‑DeWALT (1‑800‑433‑9258). LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country‑specific warranty information contained in the packaging, call the local company or see website for warranty information. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1‑800‑4‑DeWALT (1‑800‑433‑9258) for a free replacement. TROUBLESHOOTING GUIDE BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS For assistance with your product, visit our website at www.dewalt.com for a list of service centers, or call DeWALT at 1‑800‑4-DeWALT (1‑800‑433‑9258). PROBLEM POSSIBLE CAUSE SOLUTION Tool will not start. The extension cord and/or plug is defective. Have the extension cord and/or plug checked by a qualified electrician and replaced if necessary. Internal components are too hot. Allow tool to cool down. Brushes are worn out. Have brushes replaced by an authorized DeWALT service center. Reduced power. The extension cord is too long and/or its gauge Use an extension cord of an approved length and/or of is inadequate. adequate gauge. The voltage provided by the electric supply is inadequate. Connect the hammer to an adequate electric supply. The chisel cannot be released. The chuck is not pulled back fully. Pull the chuck back as far as it will go and remove the chisel. Refer to Inserting and Removing SDS Max® Chisels. 9