Dewalt DXCMLA1983054 Instruction Manual - Page 15
Maintenance Chart
View all Dewalt DXCMLA1983054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Shut-down (Fig. 1) 1. Move Auto/Off switch to the OFF position. NOTE: If finished using compressor, follow Steps 2 - 6. 2. Pull the regulator knob out and turn counterclockwise until fully closed. Ensure regulated pressure gauge reads 0 psi. Push knob in to lock in place. 3. Remove hose and accessory. WARNING: Risk of unsafe operation. Firmly grasp air hose in hand when installing or disconnecting to prevent hose whip. 4. Drain the air tank, see Draining Air Tank under Maintenance. Ensure air tank pressure gauge reads 0 psi. WARNING: Risk of bursting. Drain air tank daily. Water will condense in air tank. If not drained, water will corrode and weaken the air tank causing a risk of air tank rupture. 5. Allow the compressor to cool down. 6. Wipe air compressor clean and store in a safe, non-freezing area. MAINTENANCE Maintenance Chart Procedure FIG. 3 OFF AUTO OPEN CLOSE Daily Weekly Monthly 1 year or 100 Hours See tank warning label Check safety valve Inspect air filter Drain air tank 15 X X+ X