Dynex DX-L321-10A User Manual (English) - Page 26

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 22 Wednesday, May 13, 2009 11:38 AM 22 Troubleshooting 4 Press or to select the input source you want to assign a label to, then press ENTER. The Custom Input Label screen for that input source opens. Note: If you have forgotten your PIN, the default number is 9999. 5 Press , , , or to select a label for the input source, then press ENTER to apply the new label. 6 Repeated Steps 3-5 to apply labels to other input sources. These labels are displayed when you press INPUT or any of the individual input source keys. Restoring default settings Caution: When you restore default settings, all the settings (except the password and parental rating) you have customized are reset. To restore default settings: 1 Press MENU on the remote control, or MENU on the control panel of your TV. The on-screen menu bar opens. 2 Press or to highlight Settings, then press ENTER. The Settings menu opens. 3 Press or to highlight Reset All, then press ENTER. You are asked for your PIN. 4 Enter your PIN number. A confirmation box opens. 5 Press or to select Yes, then press ENTER to load the default menu settings. After the system reset the Welcome prompt appears. Perform a channel scan to reload the channels to your TV and then access the on-screen menus to reconfigure the TV settings. Troubleshooting Warning: Do not try to repair your TV yourself. Contact authorized service personnel. Problem Solution No power Power is suddenly turned off Your PIN is compromised • Make sure that the power indicator is illuminated blue. • Make sure that the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. Press MENU and select Settings, Sleep Timer to make sure the Leave TV Off option is selected. 1. Press MENU and select Settings, Reset All, and then Yes. 2. Access the on-screen menu again and select Locks. 3. Key in and reconfirm your new PIN. Remote control does not work • Replace the batteries. For more information, see "Installing remote control batteries" on page 6. • Make sure that the batteries are inserted correctly. For more information, see "Installing remote control batteries" on page 6. • Make sure that the power cord is plugged into an AC power outlet. The remote control code cannot be detected by a universal remote • Purchase a separate learning remote control. • Go to www.dynexproducts.com for a list of remote control codes.