Dynex DX-LCD32-09 User Manual (English) - Page 4

4 • Do not leave your TV in a hot or cold location. Also, do not leave your TV in a location exposed to direct sunlight or near a heater. This may cause the cabinet to warp and the screen to malfunction. • Storage temperature: 32° to 122°F (0° to 50°C) • Working temperature: 41° to 104°F (5° to 40°C) 26 After image-Do not allow a still picture to be displayed for an extended period, because this can cause a permanent after-image to remain on the screen. Examples of still pictures include logos, video games, computer images, teletext, and images displayed in 4:3 mode. This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible screen deterioration can be limited by observing the following: • Reduce the brightness and contrast settings to a minimum viewing level. • Do not display the fixed image for extended periods of time. • Turn off the power when not in actual use. Cautions: The permanent after-image on the screen resulting from fixed image use is not an operating defect and is not covered by the warranty. your TV is not designed to display fixed images for extended periods of time. TV components Front Side # 1 2 3 4 Component CH / CH VOL / VOL MENU INPUT 5 (power) TV components CH CH 1 VOL VOL 2 MENU 3 INPUT 4 5 Description Press to go to the next or previous channel. Press to increase or decrease the volume. Press to open the on-screen menu. Press to open the Input Source menu, press CH or CH to select the source, then press VOL to confirm. You can select TV, AV, S-Video, Component1, Component2, HDMI1, HDMI2, or VGA. Press to turn on your TV. Press again to enter standby mode. 1 2 # Component Description 1 Power indicator Lights when your TV is plugged into a power outlet. This indicator is green when your TV is on and red when your TV is in Standby mode. 2 Remote control Receives signals from the sensor remote control. Do not block.