Edimax AR-7267WnA Manual - Page 30
Wireless Mode
View all Edimax AR-7267WnA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DTIM Wireless Mode this value too low, it will result in bad performance. Enter a value from 256 to 2346. Determines the interval the Access Point will send its broadcast traffic. The range is from 1 to 255 and the default value is 3 beacons. 802.11b - It only allows 802.11b wireless network client to connect this router (maximum transfer rate 11Mbps). 802.11g - It only allows 802.11g wireless network client to connect this router (maximum transfer rate 54Mbps). 802.11b+g - It only allows 802.11b and 802.11g wireless network client to connect this router (maximum transfer rate 11Mbps for 802.11b clients, and maximum 54Mbps for 802.11g clients). 802.11n - It only allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps). 802.11g+n - It allows 802.11g, and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients). 802.11b+g+n - It allows 802.11b, 802.11g, and 802.11n wireless network client to connect this router (maximum transfer rate 11Mbps for 802.11b clients, maximum 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients). NOTE: For 802.11b and 802.11g mode, the signals can be transmitted only by antenna 1 (The antenna in the right side of the rear panel). For 802.11n mode: The router is operating in a 2T3R Spatial Multiplexing MIMO configuration. 2 antennas are for signal transmitting and 3 antennas are for signal receiving. 26