Edimax AR-7267WnA Manual - Page 6

Features, Minimum Requirements - 300mbps

Get Edimax AR-7267WnA PDF manuals and user guides View all Edimax AR-7267WnA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

1.1. Features ADSL2/2+ Compliance  Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps  Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex A, B. (Annex A and B are supported in different H/W platform)  Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for ISDN only); G.991.1;G.lite (G992.2))  Multiple Protocols over AAL5 (RFC 1483/2684)  PPP over AAL5 (RFC 2364)  PPP over Ethernet (RFC 2516) Support 802.11n Wireless Access Point  Complies with IEEE 802.11b/g/n standards  High data rate - up to 300Mbps network speed  Supports 64-bit/128-bit WEP, WPA-PSK and WPA2-PSK wireless security functions  Supports WPS (WiFi Protected Setup) to easy connect wireless network without configuring the security  Supports IP/MAC address filtering Router  NAT (Network Address Translation) IP Sharing  Virtual Server  DMZ  VPN Pass Through (IPSec/PPTP/L2TP)  SPI Anti-DOS Firewall  DHCP Server and Client Access Management  ACL (Access Control)  IP/MAC/Application/URL Filter  UPnP (Universal Plug and Play)  Dynamic DNS 1.2. Minimum Requirements The following devices are necessary to configure and use the ADSL2+ Router:  A PC with Pre-installed Ethernet Adapter (Required) and a Web-Browser (Internet Explorer 4.0 or higher)  RJ-45 Ethernet crossover cable (Included in the package)  RJ-11 (ADSL Ready) phone Line 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
2
1.1.
Features
ADSL2/2+ Compliance
Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps
Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless
ADSL2), G.992.5 (ADSL2+) for Annex A, B. (Annex A and B are supported in different H/W
platform)
Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for
ISDN only); G.991.1;G.lite (G992.2))
Multiple Protocols over AAL5 (RFC 1483/2684)
PPP over AAL5 (RFC 2364)
PPP over Ethernet (RFC 2516)
Support 802.11n Wireless Access Point
Complies with IEEE 802.11b/g/n standards
High data rate
–
up to 300Mbps network speed
Supports 64-bit/128-bit WEP, WPA-PSK and WPA2-PSK wireless security functions
Supports WPS (WiFi Protected Setup) to easy connect wireless network without configuring the
security
Supports IP/MAC address filtering
Router
NAT (Network Address Translation) IP Sharing
Virtual Server
DMZ
VPN Pass Through (IPSec/PPTP/L2TP)
SPI Anti-DOS Firewall
DHCP Server and Client
Access Management
ACL (Access Control)
IP/MAC/Application/URL Filter
UPnP (Universal Plug and Play)
Dynamic DNS
1.2.
Minimum Requirements
The following devices are necessary to configure and use the ADSL2+ Router:
A PC with Pre-installed Ethernet Adapter (Required) and a Web-Browser (Internet Explorer 4.0 or
higher)
RJ-45 Ethernet crossover cable (Included in the package)
RJ-11 (ADSL Ready) phone Line