Edimax AR-7267WnA Manual - Page 38

Enter a static IP Address to the DMZ Host. This IP Address will

Get Edimax AR-7267WnA PDF manuals and user guides View all Edimax AR-7267WnA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Parameter Virtual Circuit NAT Status Number of IPs Description Please select the channel (PVC) you want to configure. The activated or deactivated status for the NAT function will be shown here. Select "Single" if you only have a public IP Address. 4.2.2.3.2. DMZ The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP Address as the DMZ Host, all incoming packets will be checked by the firewall and NAT algorithms then passed to the DMZ Host. For example, if you have a local client PC that cannot run an Internet application (e.g. Games) properly from behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access by defining a DMZ Host. Parameter DMZ setting for Description Show the DMZ setting is for single or multiple IP Addresses. DMZ Enable or disable the DMZ function. DMZ Host IP Address Enter a static IP Address to the DMZ Host. This IP Address will be exposed to the Internet. 4.2.2.3.3. Virtual Server Use the Virtual Server function when you want different servers/clients in your LAN to handle different service/Internet application type (e.g. Email, FTP, Web server etc.) from the Internet. Computers use numbers called port numbers to recognize a particular service/Internet application type. The Virtual Server allows you to re-direct a particular service port number (from the Internet/WAN) to a particular LAN private IP Address and its service port number. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
34
Parameter
Description
Virtual Circuit
Please select the channel (PVC) you want to configure.
NAT Status
The activated or deactivated status for the NAT function will
be shown here.
Number of IPs
Select “Single” if you only have a public IP Address.
4.2.2.3.2.
DMZ
The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP Address
as the DMZ Host, all incoming packets will be checked by the firewall and NAT algorithms then passed to
the DMZ Host.
For example, if you have a local client PC that cannot run an Internet application (e.g. Games) properly
from behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access
by defining a DMZ Host.
Parameter
Description
DMZ setting for
Show the DMZ setting is for single or multiple IP Addresses.
DMZ
Enable or disable the DMZ function.
DMZ Host IP Address
Enter a static IP Address to the DMZ Host. This IP Address will
be exposed to the Internet.
4.2.2.3.3.
Virtual Server
Use the Virtual Server function when you want different servers/clients in your LAN to handle different
service/Internet application type (e.g. Email, FTP, Web server etc.) from the Internet. Computers use
numbers called port numbers to recognize a particular service/Internet application type. The Virtual
Server allows you to re-direct a particular service port number (from the Internet/WAN) to a particular
LAN private IP Address and its service port number.