Edimax AR-7267WnB Manual - Page 25
Choose Static or Dynamic IP Address. If Static IP is selected, please set
View all Edimax AR-7267WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
in the network. Please specify the MSS range from 100 to 1452 bytes or 0 byte as the default value. Default Route When "Default Router" is enabled, all the packets for destinations not known by the router's routing table are sent to the default route. By default, it is enabled. Get IP Address Choose Static or Dynamic IP Address. If Static IP is selected, please set the IP Address, Subnet Mask and Gateway obtained from your ISP. Static IP Address Enter the IP Address assigned by your ISP. Only if you chose Static above. IP Subnet Mask Enter the Subnet Mask assigned by your ISP. Only if you chose Static above. Gateway Enter the Gateway assigned by your ISP. Only if you chose Static above. NAT NAT (Network Address Translation), an Internet standard that enables a local-area network (LAN) to use one set of IP addresses for internal traffic and a second set of addresses for external traffic. When NAT is enabled, the router will help to make all necessary IP address translations for the PC connected to the router to access the Internet. Dynamic Route Dynamic routing allows routing tables in routers to change as the possible routes change. This router supports RIP1, RIP2-B and RIP2-M protocols for dynamic routing. After the RIP protocol is selected, please choose the RIP direction from "None", "Both", "IN Only" or "OUT Only". TCP MTU Option MTU (Maximum Transmission Unit) determine the maximum size of each packet in any transmission within the network. Please specify the MTU range from 100 to 1500 bytes or 0 byte as the default value. IGMP Porxy Enable or disable IGMP proxy feature. When you are done making changes, click on SAVE to save your changes. 21