Edimax AR-7267WnB Manual - Page 47

IP / MAC Filter Rule Editing

Get Edimax AR-7267WnB PDF manuals and user guides View all Edimax AR-7267WnB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

 IP / MAC Filter Rule Editing Parameter Description IP/MAC Filter Rule Index This is the item number to record the setting rule. Active Select "Yes" to enable the current rule, select "No" to cancel the current rule. Interface Select which channel (PVC) to configure. Direction Select the access to the Internet (Outgoing) or from the Internet (Incoming), or Both. Rule Type Select to filter through the IP Address or MAC Address. Source IP Address Enter the start IP Address which will be monitored. If "0.0.0.0" is set, it means for any IP Address. Subnet Mask Enter the Subnet Mask based on the Source IP Address. Port Number LAN users use port number to distinguish one network application over another such as 21 is for FTP service. The port number range is from 0 to 65535. It is recommended that this option be configured by an advanced user. Destination IP Address Enter the start IP Address which will be monitored. If "0.0.0.0" is set, it means for any IP Address. Subnet Mask Enter the Subnet Mask based on the Destination IP Address. Port Number This is the port or port ranges that define the application. Protocol It is the packet protocol type used by the application. Please select "TCP", "UDP" or "ICMP". For example, FTP service, you have to select "TCP". IP / MAC Filter Listing The IP/MAC Filter Listing will list the IP/MAC Filter rules you have configured. You can review the settings here. When you are done making changes, click on SET to save your changes, DELETE to delete the rule with the parameters you set or CANCEL to exit without saving. 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
43
IP / MAC Filter Rule Editing
Parameter
Description
IP/MAC Filter Rule Index
This is the item number to record the setting rule.
Active
Select “Yes”
to enable the current rule, select “No” to cancel the
current rule.
Interface
Select which channel (PVC) to configure.
Direction
Select the access to the Internet (Outgoing) or from the Internet
(Incoming), or Both.
Rule Type
Select to filter through the IP Address or MAC Address.
Source IP Address
Enter the start IP Address which will be monitored.
If “
0.0.0.0
” is set, it
means for any IP Address.
Subnet Mask
Enter the Subnet Mask based on the Source IP Address.
Port Number
LAN users use port number to distinguish one network application over
another such as 21 is for FTP service. The port number range is from 0
to 65535. It is recommended that this option be configured by an
advanced user.
Destination IP Address
Enter the start IP Address which will be monitored.
If “0.0.0.0” is set, it
means for any IP Address.
Subnet Mask
Enter the Subnet Mask based on the Destination IP Address.
Port Number
This is the port or port ranges that define the application.
Protocol
It is the packet protocol type used by the application. Please select
“TCP”, “UDP” or “ICMP”. For example, FTP service, you have to select
“TCP”.
IP / MAC Filter Listing
The IP/MAC Filter Listing will list the IP/MAC Filter rules you have
configured. You can review the settings here.
When you are done making changes, click on SET to save your changes, DELETE to delete the rule with
the parameters you set or CANCEL to exit without saving.