Edimax EW-7238RPD Quick Install Guide - Page 15
Resetting the Wi-Fi Extender, Browser Based Configuration Interface
View all Edimax EW-7238RPD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Resetting the Wi-Fi Extender If you experience problems with your Wi-Fi extender you can reset the extender back to factory default settings. This resets all settings back to default. To reset the extender, press and hold the WPS/Reset button for 10 seconds until the power LED ( ) is flashing. The extender will re-initialize and the power LED ( ) will display on when the extender is ready (see LED Status). Browser Based Configuration Interface After completing iQ Setup you can access the browser based configuration interface to further configure the settings of the extender, or run iQ Setup again. To access the browser based configuration interface, enter http://edimax.setup into the URL bar of a web browser on a computer which is connected to the extender's Wi-Fi network. You will be prompted for a username and password. The default username is "admin" and the default password is "1234". Windows: 14