Electrolux EW26SS75QS Complete Owner's Guide (English) - Page 15
Controls
View all Electrolux EW26SS75QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Controls 15 IQ-TouchTM NOTE *Features may vary according to model. A red indicator light will be illuminated above most active features. Touch the icon to activate the options below. fast freeze Activates a faster rate for freezing food. fast ice Increases the production of ice water filter Press and hold for three seconds to reset after filter change. air filter Filter condition status is always displayed when door is open. Press and hold for three seconds to reset after filter change. temp mode Touch to toggle display from Fahrenheit to Celsius. mute sounds Tones emitted by each key press can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. default settings Resets all refrigerator settings such as temp, temp display and tones to their factory default settings. on off Press and hold for three seconds to turn off the cooling system to clean the refrigerator. It also turns off the ice maker. The temperature displays will read OFF. eco friendly Keep this switch set on eco friendly (light on) for lowest energy usage. If moisture appears on the cabinet between the doors, pressing this button will turn the light off and enable an electric heater used to reduce moisture on the cabinet between the doors. *vacation mode Conserves energy by increasing the time between automatic defrost. This feature is automatically activated during long periods between door openings. Vacation mode is manually activated when the red indicator is lit. IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Setting cooling temperatures Press the + or - indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display.