Electrolux EW26SS75QS Complete Owner's Guide (English) - Page 9

Installation 9 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counterclockwise (when viewed from the bottom). Door To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Flipper Mullion Lower Door Hinge Washer Raise Door Raising/Lowering Door 5 Retighten the screw, where applicable, ensuring it is between the spokes of the set washer. Screw will not be tight, just insert until it is flush with the hinge. Re-tighten Screw Hinge Washer Spokes Flipper Mullion Hinge Screw Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Mullion Guide Flipper Mullion Screw Screw (where applicable) NOTE If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package. Thickness of a Coin Adjusting Flipper Mullion Height 3 Retighten screw.