Electrolux EW30GS80RS Complete Owner s Guide English - Page 45

Starting self-clean cycle

Page 45 highlights

Setting Self-Clean Cycle 45 Starting self-clean cycle A self-cleaning oven cleans itself with high temperatures (well above cooking temperatures) which eliminate soil completely or reduce it to a fine powdered ash you can whisk away with damp cloth. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. Setting the controls for a Self-Clean cycle The clean feature provides 3 different choices for self-cleaning the upper oven. Set the clean for lite (2 hrs), med (3 hrs) or heavy soils (4 hrs). The example below shows setting the upper oven for self-clean to begin immediately using a medium (3 hour) setting: To set the controls for a delayed SelfCleaning cycle: The example below shows setting the upper oven for a medium (3 hour) self-clean to end at 6:00 o'clock: Example Step Press Follow steps 1 to 6 under setting controls for a self-clean cycle, then: 7. Press COOK OPTIONS 8. Press END TIME 9. Enter time of day needed for the endofthecycle(examplefor"6:00") 6 0 0 Example Step Press 1. Porcelain racks can stay in the oven during the self-clean cycle but it is recommended to remove them. 2. Be sure the clock is set with the correct time of day and the oven door is closed. 3. Select oven by pressing UPPER UPPER OVEN OVEN 4. Press CLEAN 5. Select MED or select lite or heavy 6. Press START 7. As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR " indicator light will stop flashing and remain on. Note: When the oven is set to run a self-clean cycle, the motor door lock will begin locking the oven door. Do not open the oven door while the lock motor is running or when any locking indicators or displays are showing. The oven door is completely locked in about 15 seconds. NOTE You may press CANCEL any time during the cleaning process. After cancelling the self-clean cycle, do not attempt to open the oven door until the DOOR lock icon turns off. 10. Press START When the Self-Clean Cycle is Completed: 1. The time of day and "DOOR " will remain ON. 2. The display will show an "Hot" message while the oven is still too hot to open door. 3. Once the oven has cooled down for 1 HOUR, and the "DOOR " icon is no longer displayed, the oven door can then be opened. • During the self-cleaning cycle, the outside of the appliance can become very hot to the touch. DO NOT leave small children unattended near the appliance; they may be burned if they touch the hot oven door surfaces. • Do not force the oven door open when selfclean is active. This can damage the automatic door-locking system. Use caution when opening the door after self-clean cycle is complete; the oven may still be very hot. • The oven bake and broil elements may appear to have cooled after they have been turned off. The elements may still be hot and burns may occur if these elements are touched before they have cooled. • To avoid possible burns, use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot steam and air to escape.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

45
Setting Self-Clean Cycle
Example
Step
Press
1. Porcelain racks can stay in the oven during
the self-clean cycle but it is recommended to
remove them.
2. Be sure the clock is set with the correct time of
day and the oven door is closed.
3. Select oven by pressing
UPPER
OVEN
UPPER
OVEN
4. Press
CLEAN
5. Select
MED
or
select lite or heavy
6. Press
START
7. As soon as the control is set, the motor driven
oven door lock will begin to close automatically.
Once the door has been locked the “
DOOR
” indicator light will stop flashing and remain on.
Example
Step
Press
Follow steps 1 to 6 under setting controls for a
self-clean cycle, then:
7. Press
COOK OPTIONS
8. Press
END TIME
9.
Enter time of day needed for the
end of the cycle (example for “6:00”)
6
0
0
10. Press
START
NOTE
You may press CANCEL any time during the
cleaning process. After cancelling the self-clean
cycle, do not attempt to open the oven door until
the DOOR lock icon turns off.
A self-cleaning oven cleans itself with high
temperatures (well above cooking temperatures)
which eliminate soil completely or reduce it to a
fine powdered ash you can whisk away with damp
cloth. If you are planning to use the oven directly
after a self-clean cycle remember to allow time for
the oven to cool down and the oven door to unlock.
This normally takes about one hour.
Setting the controls for a Self-Clean cycle
The clean feature provides 3 different choices for
self-cleaning the upper oven. Set the clean for
lite
(2 hrs),
med
(3 hrs) or
heavy
soils (4 hrs). The
example below shows setting the upper oven for
self-clean to begin immediately using a medium (3
hour) setting:
Starting self-clean cycle
Note: When the oven is set to run a self-clean
cycle, the motor door lock will begin locking the
oven door. Do not open the oven door while
the lock motor is running or when any locking
indicators or displays are showing. The oven door
is completely locked in about 15 seconds.
• During the self-cleaning cycle, the outside of the
appliance can become very hot to the touch.
DO
NOT
leave small children unattended near the
appliance; they may be burned if they touch the
hot oven door surfaces.
• Do not force the oven door open when self-
clean is active. This can damage the automatic
door-locking system. Use caution when open-
ing the door after self-clean cycle is complete;
the oven may still be very hot.
The oven bake and broil elements may appear
to have cooled after they have been turned off.
The elements may still be hot and burns may
occur if these elements are touched before
they have cooled.
To avoid possible burns, use care when open-
ing the oven door after the self-cleaning cycle.
Stand to the side of the oven when opening the
door to allow hot steam and air to escape.
To set the controls for a delayed Self-
Cleaning cycle:
The example below shows setting the upper oven
for a medium (3 hour) self-clean to end at 6:00
o’clock:
When the Self-Clean Cycle is
Completed:
1. The time of day and “
DOOR
” will remain ON.
2. The display will show an “
Hot
” message while
the oven is still too hot to open door.
3. Once the oven has cooled down for 1 HOUR,
and the “
DOOR
” icon is no longer
displayed, the oven door can then be opened.