Epson 1815p Product Information Guide - Page 22

PowerLite 1810p/1815p Power status icons The projector is powered on and its status is normal. The projector is powered off and its status is normal. The projector is powered on and its status is abnormal. The projector is powered off and its status is abnormal. Temperature level status icons The projector's internal temperature is normal (low). The projector's internal temperature is normal (medium). The projector's internal temperature is normal (high). The projector's internal temperature is high (high-temperature warning). The projector's internal temperature is too high (internal temperature error). The projector is turned off automatically. Error status icons (continued) Lamp failure at power on. The lamp has reached its end of life or is installed incorrectly. High internal temperature error. The projector is turned off automatically. Internal (system) error. Contact Epson for help. Fan error. Contact Epson for help. Sensor error. Contact Epson for help. Other error. Contact Epson for help. Note: To monitor a projector when it's in standby mode (plugged in but not turned on), you must select Network On as the Standby Mode setting in the projector's Extended menu. Controlling Your Projectors The control buttons in the upper-right let you turn the projector on and off and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you've selected the projector you want to operate (with the mouse pointer) before clicking one of the buttons. Error status icons Lamp life warning. The lamp is nearing the end of its life. High-temperature warning. The projector is getting too hot but continues to operate. Replace air filter. No air filter. The air filter is not installed or installed incorrectly. Low air flow. The air filter needs to be cleaned or replaced. Air flow sensor error. There is a problem with the projector's air flow sensor; contact Epson for help. Lamp cover door open. Close the lamp cover door. Lamp out. The lamp has reached the end of its life. Control buttons Configuring the Monitoring Interval If you need to have the most current status information about your projectors, click the Refresh button in EMP Monitor. 22 - PowerLite 1810p/1815p 3/08