Epson 835p Product Information Guide - Page 19

Epson PowerLite 835p 10. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 11. Once the lamp is fully inserted, tighten its screws and replace the cover, then tighten the cover screw. (The projector won't turn on if the lamp cover is loose.) 12. Reset the lamp timer as described below. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector's menus. 1. Press the Menu button on the remote control or on the projector's control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter. You see this screen: ❏ When transporting the projector a long distance, first place it in a hard-shell shipping case, then pack it in a firm box with cushioning around the case. (An optional case is available from Epson.) Note: Epson shall not be liable for any damages incurred during transportation. 3. Select Lamp Hours Reset and press Enter. You see this prompt: 4. Select Yes and press Enter. 5. When you're finished, press Esc or Menu to exit. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ❏ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector. 10/04 Epson PowerLite 835p - 19