Epson C11C501061 Printer Basics - Page 75

Examining the Nozzle Check Pattern

Get Epson C11C501061 - Stylus Photo 900 Color Inkjet Printer PDF manuals and user guides
UPC - 010343846043
View all Epson C11C501061 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

The nozzle check pattern prints (see "Examining the Nozzle Check Pattern" below for details). 5. If the nozzle check pattern has no gaps or white lines, click Finish. If the pattern has white lines, click Clean to clean the print head again. If you don't see any improvement after cleaning three or four times, refer to "Problems and Solutions" on page 94. You can also turn the printer off and wait overnight-this allows any dried ink to soften-and then try cleaning the print head again. Examining the Nozzle Check Pattern Examine the nozzle check pattern you printed. Each staggered line should be solid, with no gaps, as shown. ■ If your printout looks okay, you're done. ■ If you see any gaps (as shown below), clean the print head again; see "Running the Head Cleaning Utility" on page 74 for instructions. Maintaining Your Printer 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Maintaining Your Printer
75
The nozzle check pattern prints (see “Examining the Nozzle Check Pattern”
below for details).
5.
If the nozzle check pattern has no gaps or white lines, click
Finish
.
If the pattern has white lines, click
Clean
to clean the print head again.
If you don’t see any improvement after cleaning three or four times, refer to
“Problems and Solutions” on page 94.
You can also turn the printer off and wait overnight—this allows any dried ink to
soften—and then try cleaning the print head again.
Examining the Nozzle Check Pattern
Examine the nozzle check pattern you printed. Each staggered line should be solid,
with no gaps, as shown.
■
If your printout looks okay, you’re done.
■
If you see any gaps (as shown below), clean the print head again; see “Running the
Head Cleaning Utility” on page 74 for instructions.