Epson C12C800WN User Guide - Page 25

Setting Up Additional Computers

Get Epson C12C800WN PDF manuals and user guides View all Epson C12C800WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Setting Up Additional Computers After you configure the print server, you need to set up a network port on all the computers that will print over the wireless network. First, do the following: 1. Make sure you have installed the printer driver and utility software. See the Start Here sheet that came with your printer for instructions. 2. Make sure your computer's wireless mode is set to either Infrastructure, if you are connecting to the printer through an access point, or 802.11b Ad Hoc if you are connecting without an access point. If your wireless adapter doesn't include an 802.11b Ad Hoc option, select Ad Hoc, Computer-to-Computer, or whatever mode your adapter uses to communicate without an access point. Do not select a pseudo ad hoc or proprietary ad hoc mode. See the documentation for your wireless adapter for instructions. 3. If you're using infrastructure mode, make sure there is a link with good signal strength between the computer and the access point. 4. Go to one of the following sections for instructions on setting up a network port: ■ "Setting Up a Network Port on Windows XP or 2000" on page 22. ■ "Setting Up a Network Port on Windows Me, 98, or 95" on page 24. ■ "Setting Up a Network Port on Windows NT 4.0" on page 27. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
21
Setting Up Additional Computers
After you configure the print server, you need to set up a network port on all
the computers that will print over the wireless network. First, do the
following:
1.
Make sure you have installed the printer driver and utility software. See
the
Start Here
sheet that came with your printer for instructions.
2.
Make sure your computer’s wireless mode is set to either
Infrastructure
,
if you are connecting to the printer through an access point, or
802.11b
Ad Hoc
if you are connecting without an access point.
If your wireless adapter doesn’t include an
802.11b Ad Hoc
option, select
Ad Hoc
,
Computer-to-Computer
, or whatever mode your adapter uses
to communicate without an access point.
Do not
select a pseudo ad hoc
or proprietary ad hoc mode. See the documentation for your wireless
adapter for instructions.
3.
If you’re using infrastructure mode, make sure there is a link with good
signal strength between the computer and the access point.
4.
Go to one of the following sections for instructions on setting up a
network port:
■
“Setting Up a Network Port on Windows XP or 2000” on page 22.
■
“Setting Up a Network Port on Windows Me, 98, or 95” on page 24.
■
“Setting Up a Network Port on Windows NT 4.0” on page 27.