Epson C12C800WN User Guide - Page 8

Windows System Requirements

Get Epson C12C800WN PDF manuals and user guides View all Epson C12C800WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Windows System Requirements For printing with the EpsonNet 802.11b Wireless Print Server, make sure each computer meets the following requirements: ■ A Microsoft® Windows compatible PC or laptop with a Pentium® processor or later, 200 MHz or faster recommended ■ Windows 95, Windows 98, Windows Me, Windows NT® 4.0, Windows 2000, or Windows XP ■ 32MB of RAM (64MB recommended) ■ 100MB of free hard disk space (200MB or more recommended) ■ VGA or better display adapter and monitor ■ CD-ROM or DVD drive for installing the printer software In addition, each computer needs to be connected to an existing wired network that has a wireless access point, or needs to have a wireless adapter installed. ■ An access point may be combined with a hub or router or may be a separate unit. For a current list of supported access points, see EPSON's web site at: http://support.epson.com. ■ Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI slot in a desktop computer, or connected through a USB port. Make sure your wireless adapters(s) work in ad hoc mode if you want to print without an access point. For a list of supported adapters, see EPSON's web site at: http://support.epson.com. To connect the print server to your printer, you also need a high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a D-SUB, 21-pin, male connector for the print server and a 36-pin Centronics® compatible connector for your printer. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
4
Windows System Requirements
For printing with the EpsonNet 802.11b Wireless Print Server, make sure
each computer meets the following requirements:
■
A Microsoft
®
Windows compatible PC or laptop with a Pentium
®
processor or later, 200 MHz or faster recommended
■
Windows 95, Windows 98, Windows Me, Windows NT
®
4.0, Windows
2000, or Windows XP
■
32MB of RAM (64MB recommended)
■
100MB of free hard disk space (200MB or more recommended)
■
VGA or better display adapter and monitor
■
CD-ROM or DVD drive for installing the printer software
In addition, each computer needs to be connected to an existing wired
network that has a wireless access point, or needs to have a wireless adapter
installed.
■
An access point may be combined with a hub or router or may be a
separate unit. For a current list of supported access points, see EPSON’s
■
Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI
slot in a desktop computer, or connected through a USB port.
Make sure your wireless adapters(s) work in ad hoc mode if you want to
print without an access point. For a list of supported adapters, see
EPSON’s web site at: http://support.epson.com.
To connect the print server to your printer, you also need a high-speed,
bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a
D-SUB, 21-pin, male connector for the print server and a 36-pin
Centronics
®
compatible connector for your printer.