Epson C12C800WN User Guide - Page 26
Setting Up a Network Port on Windows XP or 2000
![]() |
View all Epson C12C800WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting Up a Network Port on Windows XP or 2000 The process of setting up a network port is similar on Windows XP and Windows 2000. Although this section shows Windows XP, you'll see similar screens in Windows 2000. Make sure you are logged in to the computer as an administrator. Before you begin, run WP-Admin and note the IP address of your print server. Make sure the printer driver is installed, and the wireless adapter (or network adapter) is configured and working correctly. 1. Do one of the following: ■ In Windows XP, click Start > Control Panel > Printers and Other Hardware > Printers and Faxes. ■ In Windows 2000, click Start > Settings > Printers. 2. Right-click your printer icon, then click Properties. 3. On the Ports tab, select your printer (if necessary), and click Add Port. You see a window like the following: Select Standard TCP/IP Port Click New Port 4. Select Standard TCP/IP Port and click New Port. You see the Add Standard TCP/IP Printer Port wizard. 22
![](/manual_guide/products/epson-c12c800wn-user-guide-f035d18/26.png)