Epson C12C800WN User Guide - Page 41

Setting Up Additional Macintosh Computers

Get Epson C12C800WN PDF manuals and user guides View all Epson C12C800WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Setting Up Additional Macintosh Computers Once the print server is configured on your wireless network, you can install the driver and select the printer on each Macintosh. Then make sure all your computers are set up for your wireless network. 1. Make sure you have installed the printer driver and utility software. See the Start Here sheet that came with your printer for instructions. 2. Select your printer and network printer port in the Chooser. 3. Make sure your Macintosh is set up to use your wireless network, following the instructions in one of the sections below. If Your Macintosh Has an AirPort Wireless Adapter ■ Make sure AirPort is enabled in the AppleTalk Control Panel. If your Macintosh and AirPort Base Station or access point are connected over an existing Ethernet network, select Ethernet in the AppleTalk Control Panel. ■ Make sure that both AppleTalk and TCP/IP are enabled in your AirPort utility. ■ To use the printer in infrastructure mode, select a working connection to a base station or access point from the AirPort Networks list. ■ To use the printer in computer-to-computer (ad hoc) mode, create or join a computer-to-computer network. See your AirPort documentation for details. EPSON recommends that you use the print server with an AirPort Base Station or access point. With AirPort, your print server works more reliably in infrastructure mode than computerto-computer (ad hoc) mode. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
37
Setting Up Additional Macintosh
Computers
Once the print server is configured on your wireless network, you can install
the driver and select the printer on each Macintosh. Then make sure all your
computers are set up for your wireless network.
1.
Make sure you have installed the printer driver and utility software. See
the
Start Here
sheet that came with your printer for instructions.
2.
Select your printer and network printer port in the Chooser.
3.
Make sure your Macintosh is set up to use your wireless network,
following the instructions in one of the sections below.
If Your Macintosh Has an AirPort Wireless
Adapter
■
Make sure
AirPort is enabled in the AppleTalk Control Panel. If your
Macintosh and AirPort Base Station or access point are connected over an
existing Ethernet network, select
Ethernet
in the AppleTalk Control
Panel.
■
Make sure
that both AppleTalk and TCP/IP are enabled in your AirPort
utility.
■
To use the printer in infrastructure mode, select a working connection to
a base station or access point from the AirPort Networks list.
■
To use the printer in computer-to-computer (ad hoc) mode, create or
join a computer-to-computer network. See your AirPort documentation
for details.
EPSON recommends that you use the print server with an
AirPort Base Station or access point. With AirPort, your print
server works more reliably in infrastructure mode than computer-
to-computer (ad hoc) mode.