Epson C12C800WN User Guide - Page 48

You want to use a password on your AirPort network., When you see the Wireless Server Search window

Get Epson C12C800WN PDF manuals and user guides View all Epson C12C800WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

You want to use a password on your AirPort network. Because AirPort uses passwords that do not follow the standard for WEP encryption, you need to change your network password to a hexadecimal value. Follow these steps: 1. Create a computer-to-computer network without password protection on the Macintosh that you use to configure the print server. 2. Follow the steps beginning on page 14 to install WP-Admin and establish a connection to the print server. 3. Make the following selections on the Wireless Server Configuration screen: ■ Select 64BIT in the WEP key box. ■ In the 64Bit Key 1 box, enter a hexadecimal value consisting of 10 digits, or a combination of digits and letters. Digits can be from 0 to 9, and letters must be between A and F. For example: 62B91F2A98. ■ If you have an AirPort Base Station, enter a name for your network in the SSID box. Then change the Wireless Mode to Infrastructure. 4. Make any other changes you want to the Wireless Server Configuration screen and click OK. When you see the Wireless Server Search window, click QUIT. 5. If you want to use the printer in computer-to-computer (ad hoc) mode, go to step 6. If you have an AirPort Base Station, do the following: ■ For Network Name, configure the base station to use the name that you entered in the SSID box on the Wireless Server Configuration screen. ■ For Network Password, select the hexadecimal value that you entered in the 64Bit Key 1 box, preceded by the number zero (0) and lowercase letter x. For example: 0x62B91F2A98. Then go to step 7. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
44
You want to use a password on your AirPort network.
Because AirPort uses passwords that do not follow the standard for WEP
encryption, you need to change your network password to a hexadecimal
value. Follow these steps:
1.
Create a computer-to-computer network without password protection on
the Macintosh that you use to configure the print server.
2.
Follow the steps beginning on page 14 to install WP-Admin and establish
a connection to the print server.
3.
Make the following selections on the Wireless Server Configuration
screen:
■
Select
64BIT
in the WEP key box.
■
In the 64Bit Key 1 box, enter a hexadecimal value consisting of 10
digits, or a combination of digits and letters. Digits can be from 0 to
9, and letters must be between A and F. For example:
62B91F2A98
.
■
If you have an AirPort Base Station, enter a name for your network in
the SSID box. Then change the Wireless Mode to
Infrastructure
.
4.
Make any other changes you want to the Wireless Server Configuration
screen and click
OK
. When you see the Wireless Server Search window,
click
QUIT
.
5.
If you want to use the printer in computer-to-computer (ad hoc) mode,
go to step 6.
If you have an AirPort Base Station, do the following:
■
For Network Name, configure the base station to use the name that
you entered in the SSID box on the Wireless Server Configuration
screen.
■
For Network Password, select the hexadecimal value that you entered
in the 64Bit Key 1 box, preceded by the number zero (0) and
lowercase letter x. For example:
0x62B91F2A98
. Then go to step 7.