Epson C32C824151 Technical Reference - Page 43
to the Initializing UB-E02 and Status Sheet Printing
UPC - 000054074415
View all Epson C32C824151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
UB-E02 Technical Reference Guide Password The EPSON TMNet WinConfig can set a password to protect the UB-E02 settings. The screen shown below appears when you click OK or Return to Default. ❏ When you set the password the first time or you change the password, click the Change button. No password is registered until you set one. ❏ When you click the Change button, the screen shown below appears. Input the password (up to 20 single-byte alphanumeric characters) and then click OK. Capital and lower-case characters are distinguished. CAUTION: The password is used for both the EPSON TMNet WinConfig and the EPSON TMNet Web Config. When you use either utility, be sure to control the password. The new password is effective after clicking the OK button to send the configuration data. Right after the setting, using the Administrator password, input the current password. If you forget your password, you need to return all settings to the default settings. Refer to the Initializing UB-E02 and Status Sheet Printing section in Chapter 2. Rev. A Utilities 3-19