Epson C32C824151 Technical Reference - Page 8
Caution
UPC - 000054074415
View all Epson C32C824151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Safety Precautions This section presents important information to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location. CAUTION: ❏ Be careful to avoid dropping conductive objects such as paper clips on the circuit board, as they could short circuit connections and cause damage from excessive current. ❏ This product should only be connected to the devices specified in this guide. Connecting other devices could cause damage, fire or explosion. ❏ Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock. ❏ Be sure to set the product on a firm, stable, horizontal surface. The product may break or cause injury if it falls. ❏ Never connect a public telephone line to the modular connector on this product. ❏ Do not use in locations subject to high temperature, humidity or dust levels. Excessive temperature, humidity or dust may cause equipment damage, fire, or shock. ❏ Parts on the circuit board may become hot during operation. Therefore, wait approximately 10 minutes after turning the power off before touching them. ❏ To prevent the possibility of electrical shock, do not perform installation or connect cables during a thunderstorm. Label A caution label like the one is attached near the display module connector of the TM printers. The label has the following meaning: "The display module connector and the drawer kick-out connector use the same type of Ethernet connector; therefore, be sure not to connect the Ethernet connector cable or the telephone line to the display module connector or the drawer kick-out connector." Product Servicing This product cannot be serviced at the component level. If damage occurs, the UB-E02 should be replaced as a unit. vi Rev. A