Epson C7500G Setup Guide - Page 12

English ❏ In a location where a dedicated power outlet is available. ❏ In a location where you can set and remove paper without difficulty. ❏ In a location with sufficient space around the product to allow for installation of accessories, replacement of consumable products, and daily cleaning. ❏ In a location meeting the following conditions: Temperature Humidity Operating: 5 to 35°C {41 to 95°F} Storage: -20 to 40°C {-4 to 104°F} (At 40°C {104°F}: up to 1 month) Operating: 20 to 80% RH Storage: 5 to 85%RH (No condensation) Connecting the Power Cable Connect the power cable by following the steps below. !WARNING: ❏ Use only AC 100 V for the power supply. Using other type of power supply may cause electric shock or fire. ❏ Be sure to install this product in the vicinity of a power outlet so that you can immediately unplug the product if some fault or other problem occurs. 1. Make sure that the printer is powered off. (U "Turning Off" on page 10) 2. Insert the power cable connector into the AC inlet on the product securely to the bottom. 3. Fully insert the power plug securely into the outlet. 12