Epson C7500G Setup Guide - Page 5

English ❏ There may be some ink around the ink supply port on the removed ink cartridge. Take care so that it does not stain the desk or other surface. ❏ Do not remove the ink cartridge, except when you replace it. ❏ Do not open the ink cartridge package until you are ready to install it in the product. ❏ Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it around too much or push the sides strongly. ❏ Do not allow foreign objects to fall into the cartridge installation section. Doing so may cause printing malfunction. Remove any object that might have fallen into the installation section, taking care not to damage the section. ❏ When ink is charged for the first time (right after purchase), ink is consumed for filling the print head nozzle (ink discharge holes) to get ready for printing. That is why the number of the printable sheets may be fewer than for the cartridges to be installed later. ❏ If you turn the power off the product using the power button, the print head is automatically capped, which prevents the ink from drying. After installing the ink cartridges, be sure to turn the power off using the power button when you are not using the product. Do not pull out the power plug or trip the breaker while the power is on. ❏ Printing on water-repellent paper such as art paper, which is slow-drying, may cause print stains. Also, printing on glossy paper may cause finger prints on the paper or ink may adhere to your fingers when you touch it. Select paper not to case print stains before use. Caution Label The caution label on the product indicates the following precaution. !CAUTION: Take care not to injure your fingers on the fixed blade of the autocutter. 5