Epson C7500GE Technical Reference Guide - Page 160

Cleaning the Printer Cleaning the autocutter If adhesive from the label paper adheres to the autocutter, the autocutter may become blunt. In this case, clean the autocutter with the following steps. 1 Turn the printer power off, and disconnect the AC cable from the wall outlet. 2 Open the roll paper cover and remove the paper. See "How to eject paper for paper replacement" on page 61 3 Remove the adhesive on the autocutter fixed blade of the roll paper cover side with a cotton swab. Slightly moisten the cotton swab with alcohol, if necessary. Do not touch the autocutter fixed blade directly with fingers during cleaning, or injury may result. WARNING Cleaning the Printer Case Be sure to unplug the AC cable from the wall socket, and turn off the printer before cleaning. Wipe the dirt off the printer case with a dry cloth or a damp cloth. CAUTION Never clean the product with alcohol, benzine, thinner, or other such solvents. Doing so may damage or break the parts made of plastic and rubber. 160