Epson C7500GE Technical Reference Guide - Page 204
When Borderless Printing is enabled, Vertical margins, 5 mm {0.06} Typical value, Lateral margins
View all Epson C7500GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
When "Borderless Printing" is enabled Vertical margins: 1.5 mm {0.06"} (Typical value) Lateral margins: 0 mm (Typical value) Auto-cut position Paper width 1.5 mm {0.06"} Paper feeding direction 25.4 mm {1.0"} or more 28 mm {1.10"} or more 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm 0{ .08" } Print area width Outer edge (Removed) 2.0 mm {0.08"} Print area Label area Paper Black mark position If you enabled "Extend Printable Area", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black marks or skips them, etc. 204