Epson C7500GE Technical Reference Guide - Page 173
Unclean media, Dirt inside the printer, Printable area
View all Epson C7500GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Chapter 3 Handling Unclean media State The media gets dirty. Cause Recovery method The "Media Coating Type" setting is different from the actual media. The media used and "Media Coating Type" setting of the printer driver may be different. Check the media used and the "Media Coating Type" setting of the printer driver. For details, refer to "Paper settings" on page 67 A head cleaning is neces- Media may get dirty if foreign objects are attached to the head. sary. Perform a manual head cleaning. Dirt inside the printer State Cause Recovery method The ink stain has The "Media form" setting The media used and "Media form" setting of the printer driver may occurred. is different from the actual be different. media. If the setting is for full-page label, do not use die-cut label. Ink dis- charge on the base paper can lead to staining and other troubles. 3 Printable area State The print position is not correct. The label size and print area are different. Part of the printing will go missing. Borderless printing cannot be done. Cause Recovery method The "Media Layout" is not configured correctly. When the "Media Layout" settings of the printer and the media are different, printing may not be performed on the correct positions. For details, refer to "Paper settings" on page 67 This is the specification of the product. When using the printer driver and "Borderless Printing" is not enabled in "User Defined Media Layout" and "Media Layout": The area where 1.5 mm margins on the top, bottom, right and left are excluded from the label size is the printable area. When making the whole label size as the printable area, enable "Borderless Printing". When "Borderless Printing" is enabled, printing on full-page may occur; therefore, ensure 1.5 mm margins on the top, bottom, right and left in the print data. For details, refer to "Paper settings" on page 67 The "Media Layout" is not configured correctly. Even if "Borderless Printing" is enabled for full-page label (no blackmark), printing cannot be performed over the entire length of the label. Configure so that the printing area fits inside the 1.5 mm margins at the top and bottom of the label. The "Media Layout" is not configured correctly. Even if "Borderless Printing" is enabled for full-page label (no blackmark), printing cannot be performed over the entire length of the label. Configure so that the printing area fits inside the 1.5 mm margins at the top and bottom of the label. 173