Epson C7500GE Technical Reference Guide - Page 210
The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm
View all Epson C7500GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
When "Borderless Printing" is enabled Vertical margins: 0 mm (Typical value) Lateral margins: 0 mm (Typical value) Perforated line Auto-cut position Paper width 0.5 to 1 mm { 0.02 to 0.04" } 1.5 mm {0.06"} Paper feeding direction 28.4 mm {1.12"} or more Auto-cut position Auto-cut position 1.5 mm {0.06"} Outer edge (Removed) 2.0 mm { 0.08" } Print area width Print area Label area Paper Outer edge Black mark position (Removed) 2.0 mm { 0.08"} If you enabled "Extend Printable Area", printing is done with settings for no margins, but the printing might protrude beyond the paper/ label, depending on the actual print position and the set position for the paper/ label. To make sure printing doesn't protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. The distance from the paper cut position to the black mark leading edge must be at least 1.5 mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages because it fails to sense their black marks or skips them, etc. 210