Home » Epson Manuals » Printers » Epson C7500GE » Manual Viewer

Epson C7500GE Technical Reference Guide - Page 165

LCD display, Error, Description, Recovery method, PAPER OUT ERROR

Add to My Manuals
Save this manual to your list of manuals

Page 165 highlights

Chapter 3 Handling LCD display Error Description Recovery method PAPER JAM ERR ## (##: D1 to D5, DC, 11 to 15, 21 to 25, 51, 61) Paper jam error Paper is jammed inside printer 1. Open the paper set cover. 2. Open the front cover. If you cannot open the front cover, the cutter blade may be locked. Turn this product's power off and on again. 3. Remove all the paper that is in the paper path. 4. Close the front cover. 5. Run auto loading of the paper. 6. Close the paper set cover. PAPER OUT ERROR Paper out error Paper has run out during printing If any paper remains in the paper path, remove it. Then set new paper in place. PAPER PATH ERROR Paper path error The paper supply method for the paper set is different from the method specified in the "Media supply method settings". Set paper in place that is appropriate for the "Media supply method settings", or change the "Media supply method settings" to suit the paper. The method of the paper supply set Set the method of paper supply specified on "the to the printer is different from the label printing application" or "the printer driver pro- specified method of the paper sup- vided by the label printing application manufacply on "the label printing applica- turer" to that is suitable for the actual supply. 3 tion" or "the printer driver provided For instructions on how to change the settings, by the label printing application refer to "Media detector and paper path settings manufacturer". when using label printing applications" on page 223. PAPER REMOVAL ERROR Paper removal error Paper is not set correctly in place, or paper has not been removed after ejection operation. If no paper remains on the platen: Set paper in place again. See Appendix C for how to set the paper in place. If paper remains on the platen: 1. Open the paper set cover. 2. Open the front cover. 3. Remove all the paper that is in the paper path. 4. Close the front cover. 5. Run auto loading of the paper. When there is not much roll paper left, printing ended near the end of the roll paper. Replace the roll paper. ROLL COVER OPEN Roll paper cover open The roll paper cover is open. Close the roll paper cover. PAPER COVER OPEN Paper set cover open The paper set cover is open Close the paper set cover. FRONT COVER OPEN Front cover open The front cover is open Close the front cover. INK COVER OPEN Ink cartridge cover open The ink cartridge cover is open. Close the ink cartridge cover. 165

Section	Page
For Safety	3
Key to Symbols	3
Cautions on Installation	3
Cautions on Power Supply	4
Cautions on Handling	5
Cautions on the Ink Cartridge / Maintenance box	6
Caution Label	7
Restriction of Use	8
About this Manual	9
Aim of the Manual	9
Manual Content	9
Contents	10
Product Overview	15
Features	15
Printing	15
Operability	16
Reliability	16
Easy setup	16
How to Print	16
Other Features	17
Part Names and Functions	18
Front Side	18
Operation Panel	19
Rear Side	21
Nozzle Verification Technology	22
Setting the Nozzle Verification Technology	22
Dot substitution	24
Periodic auto cleaning	25
Status/Error Indications	26
Ink Cartridge and Maintenance Box Status	30
Beeper	31
Reprint	32
Setup	33
Install Navi	34
Work flow to set up this product without using the Install Navi	35
Checking the Items Included in the Package	36
Installing the Printer	37
Location Appropriate for Installation	38
Connecting the Power Cable	39
Connecting the Interface Cable	40
Turning On/Off	41
Turning On	41
Turning Off	41
Installing the Ink Cartridge	42
Installing the Maintenance box	46
REWINDER	49
How to install the REWINDER	49
Removing the rewinder	50
Attaching the paper leading edge to the rewinder	50
Setting the Paper	52
Setting the Roll Paper	52
Setting the Fanfold Paper	60
How to eject paper for paper replacement	61
Ejection Angle of Printed Paper	62
Printer settings	63
Language Setting	63
Time Setting	64
Network settings	65
Paper settings	67
Set using a printer driver	67
Setting using the PrinterSetting	70
Setting with the operation panel	73
Test printing	74
Test Printing	75
How to Display the Printer Driver	76
Handling	77
List of printer setting items	77
Setting panel switch	80
Printing the status sheet (Network settings)	84
Favorite	85
Cutting the Incomplete Label	86
PrinterSetting	87
Starting the PrinterSetting	88
Apply settings	90
Media settings	91
Layout settings	92
Position adjustment	94
Print results adjustment	96
Store data in the printer	97
Background image settings	98
Print head maintenance	100
Printer settings	101
Panel settings	102
Nozzle check settings	103
Advanced settings	104
Initialize printer	108
Printer information	109
Settings save and restore	111
Option	112
Setting the Printer Driver	113
Favorite Setting	113
User Defined Information	116
Exporting/ Importing Printer Driver Settings	116
Barcode Printing	119
2D symbol Printing	129
Barcode and 2D Symbol Font Printing on .NET Environment	136
Banding Reduction	138
Start the PrinterSetting from the printer driver.	139
Setting EPSON Status Monitor 3	140
Restricted items of printer drivers	146
EpsonNetConfig (Web version)	147
Setting the label size and paper layout for borderless printing	151
Borderless Printing Concepts	151
Label Media Design	152
Borderless Printing Settings	152
USB Printer Class Device Replacement Service	157
Uninstallation of USB Printer Class Device Replacement Service	157
Restrictions in USB Printer Class Device Replacement Service	158
Setting the Dip Switches	159
Setting Procedure	159
Cleaning the Printer	160
Cleaning the autocutter	160
Cleaning the Printer Case	160
Long-term Storage of the Product After Ink Charging	161
Storing the product	161
Restart the printer after long-term storage	162
Precautions when transporting	163
Troubleshooting	164
Error Processing	164
Warning Processing	168
Printer Driver	169
Poor print quality	170
Unclean media	173
Dirt inside the printer	173
Printable area	173
Detection failure	174
Continuous printing cannot be performed	175
External supply	175
Paper is jammed	176
Application Development Information	179
How to Control the Printer	179
Using label printing application	179
Using the Epson Inkjet Label Printer SDK	180
Using the ESC/Label commands	180
Changing Printer Settings and Replacing the Printer	180
Software and Manuals	186
Installing software	188
Software installation procedures	188
Appendix	191
Product Specifications	191
Operating Environment	193
Printing Specifications	194
Paper Specifications	195
Paper detection method	202
Print Area and Cutting Position	203
Electrical Characteristics	213
Reliability	214
Environmental Conditions	215
External Dimensions	216
Consumable Product Specifications	219
Ink Cartridge	219
Maintenance Box	219
Option Specifications	220
Rewinder (TU-RC7508)	220
LCD Display Specifications for the Number of Printed Copies	221
Display While Printing	221
Error Display While Printing	221
Display When the Number of Printed Copies is Carried Up to 8 digits	221
Downloading Drivers, Utilities, and Manuals	222
Media detector and paper path settings when using label printing applications	223
Changing the media detector settings in BarTender	224
Changing the paper path settings in BarTender	226
Changing the media detector settings in NiceLabel	227
Changing the paper path settings in NiceLabel	229
Changing the media detector settings in CODESOFT	230
Changing the paper path settings in CODESOFT	231

Match case Limit results 1 per page

165

Chapter 3

Handling

PAPER JAM ERR ##

(##: D1 to D5, DC,

11 to 15, 21 to 25, 51, 61)

Paper jam error

Paper is jammed inside printer

Open the paper set cover.

Open the front cover.

If you cannot open the front cover, the cutter

blade may be locked. Turn this product's power

off and on again.

Remove all the paper that is in the paper path.

Close the front cover.

Run auto loading of the paper.

Close the paper set cover.

PAPER OUT ERROR

Paper out error

Paper has run out during printing

If any paper remains in the paper path, remove it.

Then set new paper in place.

PAPER PATH ERROR

Paper path error

The paper supply method for the

paper set is different from the

method specified in the “Media sup-

ply method settings”.

Set paper in place that is appropriate for the “Media

supply method settings”, or change the “Media sup-

ply method settings” to suit the paper.

The method of the paper supply set

to the printer is different from the

specified method of the paper sup-

ply on "the label printing applica-

tion" or "the printer driver provided

by the label printing application

manufacturer".

Set the method of paper supply specified on "the

label printing application" or "the printer driver pro-

vided by the label printing application manufac-

turer" to that is suitable for the actual supply.

For instructions on how to change the settings,

refer to

"Media detector and paper path settings

when using label printing applications" on page

223

PAPER REMOVAL ERROR

Paper removal error

Paper is not set correctly in place, or

paper has not been removed after

ejection operation.

If no paper remains on the platen:

Set paper in place again.

See Appendix C for how to set the paper in place.

If paper remains on the platen:

Open the paper set cover.

Open the front cover.

Remove all the paper that is in the paper path.

Close the front cover.

Run auto loading of the paper.

When there is not much roll paper

left, printing ended near the end of

the roll paper.

Replace the roll paper.

ROLL COVER OPEN

Roll paper cover open

The roll paper cover is open.

Close the roll paper cover.

PAPER COVER OPEN

Paper set cover open

The paper set cover is open

Close the paper set cover.

FRONT COVER OPEN

Front cover open

The front cover is open

Close the front cover.

INK COVER OPEN

Ink cartridge cover open

The ink cartridge cover is open.

Close the ink cartridge cover.

LCD display

Error

Description

Recovery method