Epson DM-D210 Technical Reference Guide - Page 62
Place a cap on the USB cable to store in the pole. Store the rest of RS-232 cable in
![]() |
View all Epson DM-D210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 2 Setup 6 Install the ferrite core to the RS-232 cable of the customer's display, remove the cap, and connect the cable to the printer's DM-D connector. 7 Hook the cable to the tab of fixing plate A and secure. 2 8 Turn the printer over to the normal status. 9 Place a cap on the USB cable to store in the pole. Store the rest of RS-232 cable in the pole, and then install the customer display to fixing plate A. 62
![](/manual_guide/products/epson-dmd210-technical-reference-guide-3736e41/62.png)
62
Chapter 2
Setup
2
6
Install the ferrite core to the RS-232 cable of the customer's display, remove the cap,
and connect the cable to the printer's DM-D connector.
7
Hook the cable to the tab of fixing plate A and secure.
8
Turn the printer over to the normal status.
9
Place a cap on the USB cable to store in the pole. Store the rest of RS-232 cable in the
pole, and then install the customer display to fixing plate A.