Epson DM-D210 Technical Reference Guide - Page 99
DP-110/DP-210 Connector Specifications, Computer Interface Connector Serial
View all Epson DM-D210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
DP-110/DP-210 Connector Specifications This section explains the DP-110/DP-210 connector specifications. Computer Interface Connector (Serial) Type: D-Sub 25-pin connector 14 25 Appendix 1 13 Pin assignments Pin Signal Number Name 1 FG 2 TXD 3 RXD 4 *1 RTS 6 *2 DSR 7 GND Signal Direction Function - Frame ground Output Stand-alone connection: Transmits data to the computer from the this product Pass-through/Y-type connection: Transmits data to the computer from the TM printer. Input Output Receives data from the computer. (Computer -> This product) This indicates whether the display is ready to receive data. *2 [SPACE]: The display can receive data. DTR goes to SPACE under the following conditions: When the display first becomes ready to receive data after power on. When the self-test has ended. When the remaining space in the receive buffer becomes 50 bytes or more after having been 40 bytes or less. [MARK]: The display cannot receive data. DTR goes to MARK under the following conditions: The period from when power is turned on to when the display first becomes ready to receive data. When the self-test is executed. When the remaining space in the receive buffer becomes 128 bytes or less (buffer-full state). When DSR MARK is on, if the TM printer is selected by a peripheral device command. Input Indicates whether the computer is ready to receive data. [SPACE]: The computer is ready to receive data. [MARK]: The computer is not ready to receive data. - Signal GND 99