Epson DM-D500 Installation Guide - Page 17

English Required items The items shown in illustration 35 are used to attach a DM-D500 to a TM-T88II, TM-U210, TM-U230, TM-T90, or TM-L90 printer. These items are packed with the "DM-D pole unit for TM printers" (DP-505). 35 support extension support fixing plate installation manual fixing screws for wooden position Velcro tapes (square type) Velcro tape (round type) Assembling Before assembling this product, you must install the UB-S09 in the TM printer. See the UB-S09 installation manual for the installation instructions. Assembling using Velcro tapes 1. Make sure both the printer and the host computer are turned off. 2. Disconnect the DC cable from the printer. CAUTION: ❏ You must disconnect the power supply because electrical current is flowing in some parts of the printer circuit even when the power switch is turned off; otherwise, you may damage the UB-S09 and the printer. ❏ When disconnecting the DC cable, hold the plug firmly. Do not tug on the cord itself. DM-D500 Installation Guide 15