Epson DM-D500 Installation Guide - Page 25

English Precautions on using the power supply unit To avoid damage to the DM-D500 and the power supply unit, note the following points. ❏ Use the optional Seiko Epson product, PS-180, as the power supply. ❏ Never connect the DC cable to the power supply unit when the power supply unit is connected. ❏ Unplug the DC cable by holding the connector part. If you pull the cable to unplug it, it may be damaged. Assembling 1. Pass the cable for the DM-D500 through the DM-D stand as shown in illustration 58. When raising the height of the DM-D stand, attach the extension support (DP-105) to the DM-D stand as shown in illustration 59. 58 59 when using the extension support (DP-105) 2. Insert the tab on the DM-D500 (or the extension support) into the hole on the DM-D stand as shown in illustration 60 until you feel it click. 60 DM-D500 Installation Guide 23