Epson DM-D500 Installation Guide - Page 32

Turning and Tilting the DM-D500, the position of the tab on the base so that the display faces in

Page 32 highlights

English Turning and Tilting the DM-D500 You can turn or tilt the display while holding the support. The display can be moved easily, so do not move it any further if it stops. If you move it by force, you may damage it. With the "DM-D pole unit for IR" (DP-504) and the "DM-D pole unit for TM printers (Type B)" (DP-503), the display area may not face the direction you desire. In this case, remove the base, change the position of the tab on the base so that the display faces in the direction you desire, and reattach it to the base as shown in illustration 69. 45° for left 48° (you can turn the same angle for right) 69 The display area has the following range of movement: ❏ Tilt: 48° max. (4 steps, 5 positions) ❏ Horizontal rotation: 90° max. (45° for each left and right) 30 DM-D500 Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

30
DM-D500 Installation Guide
English
Turning and Tilting the DM-D500
You can turn or tilt the display while holding the support. The
display can be moved easily, so do not move it any further if it
stops. If you move it by force, you may damage it.
With the “DM-D pole unit for IR” (DP-504) and the “DM-D pole
unit for TM printers (Type B)” (DP-503), the display area may not
face the direction you desire. In this case, remove the base, change
the position of the tab on the base so that the display faces in the
direction you desire, and reattach it to the base as shown in
illustration 69.
The display area has the following range of movement:
Tilt: 48
°
max. (4 steps, 5 positions)
Horizontal rotation: 90
°
max. (45
°
for each left and right)
69
48
°
45
°
for left
(you can turn the
same angle for right)