Epson DM-D500 Installation Guide - Page 19
CAUTION, Peel off the backing on the other side of the Velcro tapes,
View all Epson DM-D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English 5. Peel the backing off of one side of the Velcro tapes, and attach the tapes to both faces of the fixing plate. See the table below to find the attaching position for Velcro tapes and the display for your particular printer. (The positioning numbers of Velcro tapes on the fixing plate are shown in illustrations 39 and 40.) Printer type TM-T88II TM-U210/U230/T90/L90 Positioning number of Velcro tape attachment 1 to 9 and 11 1 to 11 1 to 11 Attaching position for display (seen from the front of the printer) Right side Left side Both sides 3 1 39 40 5 8 6 10 4 2 11 9 7 6. Peel off the backing on the other side of the Velcro tapes, and stick the fixing plate where you want it. 7. Connect the cable for the display to the DC connector on the TM printer (UB-S09) until you feel it click as shown in illustration 41. Store any excess cable in the TM printer, if necessary. 41 TM-T88II printer with the UB-S09 installed CAUTION: Do not connect this connector to an ordinary telephone line. DM-D500 Installation Guide 17