Epson DM-D500 Installation Guide - Page 20

English 8. Place the TM printer on the fixing plate. (See the table below for the mounting position for each TM printer.) Printer type TM-T88II TM-U210/U230/T90/L90 Mounting positions for TM printers Set the printer so that no rubber foot on the rear side of the printer is placed on the Velcro tape. Set the printer so that no rubber foot on the rear side of the printer is placed on the Velcro tape. Set the printer so that the iron plate on the rear side of the printer is placed on the Velcro tapes. Note: 42 Place the TM-U230 printer as shown in illustration 42. (Do not place it vertically.) 9. Connect the power supply to the TM printer. Assembling using screws 1. Follow steps 1 to 4 in "Assembling using Velcro tapes." 2. Secure the fixing plate where you want it 43 with the fixing screws as shown in illustration 43. 3. Follow steps 7 to 9 in "Assembling using Velcro tapes." Attaching to Other TM Printers When using with other TM printers, the DM-D500 can be attached to a desk or other surface using the "DM-D pole unit for TM printers (Type A)" (DP-502) and screws or Velcro tapes. 18 DM-D500 Installation Guide