Epson DM-D500 Installation Guide - Page 28
Attach the base plate to the DM-D stand following the numbers, DM-D500 inside the DM-D stand.
View all Epson DM-D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English 7. Connect the DC cable of the power supply unit (with the arrow mark up) to the power supply unit connector indicated with "POWER IN" on the DM-D stand as shown in illustration 65. power supply unit connector 65 DC cable of power supply unit 8. When using as a standalone product, set the jumpers as shown in "Jumper settings" on page 22. 9. Arrange the cables as shown in 66 illustration 66. Put the cables for the DM-D500 inside the DM-D stand. 10. Attach the base plate to the DM-D stand following the numbers of the arrows shown in illustration 67. Then, push the base plate until it is locked by the hook on the DM-D stand. 67 11. When the extension support (DP-105) is used, attach Velcro tapes to the four corners of the plate to keep it from falling down. 12. Connect the cord of the power unit to the socket. 26 DM-D500 Installation Guide