Epson EMP 5100 Owners Manual - Page 26
Connecting to a PC desktop computer, the back of your computer and connect the mouse connector
View all Epson EMP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting to a PC desktop computer Before beginning, make sure that the projector and computer are both turned off. 1. Connect either end of the computer cable to the projector's Computer In 1 port. The Computer In 2 port is used when connecting a second computer. 2. Disconnect the computer's monitor cable from the computer's monitor port and connect the other end of the computer cable to this port. 3. If necessary, connect the monitor cable of the computer monitor to the projector's Monitor port. 4. Connect the small end of the main cable to the projector's Mouse/Com 1 port. The Mouse/Com 2 port is used when you are connecting a second computer. 5. Connect the PS/2 mouse cable (9-pin) to the mouse terminal on the large end of the main cable. 6. Disconnect the computer's mouse cable from the mouse port on the back of your computer and connect the mouse connector (6-pin) of the PS/2 mouse cable to the mouse port. 7. If you are planning to use the ELP Link II software, connect either end of a PC serial cable to the PC SERIAL terminal on the large end of the main cable. 8. Connect the other end of the PC serial cable to the serial port on the back of your computer. 9. Tighten all connector screws to ensure secure connections. • Note that you will not be able to use the ELP Link II software if your system does not have two serial ports. 8 1 • Installation