Epson EMP 5100 Owners Manual - Page 38
Turning the Equipment On and Off, Never look into the lens when the lamp is on. This can
View all Epson EMP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Turning the Equipment On and Off Always turn on the projector and its attached equipment in the following order. 1. Video source 2. Audio source (if different than computer or video source) 3. Projector 4. External speaker or PA system 5. Computer Remove the projector's lens cap before turning on projector. The operation indicator will flash for a while and then light up to indicate that power is on. If a computer or video equipment is attached to the projector, the video signal or computer signal from the attached equipment will be projected. It will take at least 30 seconds after turning the power on before a normal image appears. x Warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children are not allowed to look into the lens. x Note: Remove the projector's lens cap when you project. The light from the projector may cause the lens cap to warp. Reverse the order shown above to turn off the projector and other equipment. After you press the Power button to turn off the projector, the fan will remain on and the operation indicator will flash orange for about one minute as the projector cools. The indicator stops blinking (and remains lit in orange) when the cooling operation is complete. 20 2 • Using the Projector