Epson EMP 5100 Owners Manual - Page 40
Screen Image Position, This foot is locked. You will need to unlock it before it can be, rotated.
View all Epson EMP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Screen Image Position If you need to raise or lower the image on the screen, extend or retract the front foot on the bottom of the projector. 1. While standing behind the projector and supporting the front of it by holding the handle located below the lens, press down on the foot release button. This unlocks the front foot, allowing it to move up and down freely. Take care that the projector does not suddenly drop down at this time. 2. While pressing the foot release button, raise and lower the projector until the screen image is positioned the way you want it. 3. Release the foot release button to lock the front foot in its present position. 4. Rotate the left foot at the back of the projector to fine-tune the position of the projected image. x Note: This foot is locked. You will need to unlock it before it can be rotated. 22 2 • Using the Projector