Epson EMP-8000 Owners Manual - Page 107
Replacing the Lamp
View all Epson EMP-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Replacing the Lamp Replace the lamp when: • The projected image gets darker or starts to deteriorate. • The projection lamp indicator is flashing orange . • The message "LAMP REPLACE" appears on the screen when the projector lamp comes on. ♦ Note: To keep the initial brightness and image quality, replace the lamp as soon as possible when the message appears on the screen. The replacement message is set to being displayed at adout 2000 hours of use. Contact your local EPSON dealer for a spare lamp. Request part number ELPLP08. ♦ Warning: Let the lamp cool before replacing it. Also, do not touch the glass portion of the lamp assembly. Touching the glass portion of the lamp will result in premature lamp failure. 1. Turn off the projector and unplug the power cable. 2. Use a screwdriver that came with your spare lamp to loosen the two retaining screws on the lamp cover. When the screws are loose, lift off the lamp cover. (You cannot remove these screws from the cover.) s s s s 86