Epson EMP-8000 Owners Manual - Page 28

Connecting to a PC Desktop Computer To connect the projector to your PC desktop computer, you need to: • Connect the computer cable and computer monitor cable • Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link IV software) • Connect the audio cable (if you'll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on. ♦ Note: Computer configurations vary. See your computer manual for the location of the ports needed to connect your projector. Connecting the Video and Monitor Cables First connect the computer cable and computer monitor cable. Refer to this illustration while following the steps below. Computer 1 port computer cable Computer Out port monitor cable ♦ Note: If your computer output is a 5BNC type, use the computer cable (5BNC). s s s s s s Connecting to a Computer 7