Epson EMP-8000 Owners Manual - Page 50
appropriate cable or use the cable that came with your
View all Epson EMP-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
For component video, use the BNC type cable that came with your video source. The illustration below shows the S-Video, component, and composite connectors. S-Video 4-pin, mini-DIN 1 2 component BNC connector composite RCA 3 4 To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. If your video source uses a small, round, one-prong composite (RCA) video connector, you'll need the RCA video cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector or a BNC type connector, you will need to purchase the appropriate cable or use the cable that came with your video source. 3. For Composite Video, connect the yellow RCA plug on one end of the RCA video cable to the projector's Video jack. Connect the other yellow RCA plug to the video-out jack of your video source. RCA audio cable RCA video cable s s s s s s Connecting to a Computer 29