Epson EMP-8000 Owners Manual - Page 114
A blank screen is displayed., The image or parts of the image are blurred or not, in focus.,
View all Epson EMP-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
the image source. Then check that the image source is selected correctly. When NO SIGNAL is displayed, you cannot access the Video (computer/video) menu. ❑ A blank screen is displayed. The computer signal cannot be interpreted by the projector. Verify the display format (see page 97, 98). When you see a blank screen, you cannot access the projector menus. ❑ The image or parts of the image are blurred or not in focus. Adjust the Brightness and Contrast settings on the Video menu. If you're viewing a computer image, also try adjusting the Tracking and Sync buttons on the projector's operation panel. There may be dirt or smears on the lens. Clean the lens as described in Chapter 5, "Maintenance." ❑ The colors of the image are not right. The color balance may be incorrect. If you're displaying a computer image, adjust the red, green, and blue settings in the Video menu. If you're displaying video, adjust the Color and Tint (NTSC only) settings on the Video menu. ❑ There is no sound. First check that the volume setting is not turned all the way down and that the RCA audio cable is securely attached to both the projector and the audio source. Also, make sure that the Mute button is off. The wrong source is selected. Press either the Computer or Video button on the remote control or operation panel to select the proper source. s s s s s s Problems with the Image or Sound 93